23,500 lbs
¼” plate pin together with 2″ solid pins,
(4) Pad eyes on each barge
(2) Pinning spots.
Frame work consist of 6″ channel on deck With 5″ channel on bottom and 2″ x 3″ x ¼” diagonals.
Bottom longs and deck longs are 2″ x 3″ x ¼” angle.
Stern 2″ x 3″ x ¼” Angle with 5″ channel supports uprights.
Two hatch covers on deck with a hatch door through the rake bulkhead.
Paint System epoxy one coat on inside and two coat system on Outside
(6) anodes on each barge.
(4) D rings for lifting purpose (empty only).